Floor Scrubbing & Acid Washing Logan
Logan's concrete work splits between the light industrial belt and the rental market. Slacks Creek, Underwood, Meadowbrook and Yatala are full of small factory units, workshops and loading docks where the slab is the working surface and it shows. The other half is domestic: garages and carports at the end of a tenancy, where a property manager has flagged oil stains on the exit report and the tenant needs them gone before the bond is settled. Those are small, fast jobs, and we will usually do the driveway at the same visit while the machine is out.
Mon to Sun, 7:00am – 9:00pm — weekends included at no extra charge

What we get called out for in Logan
- Small factory units, workshops and loading docks through Slacks Creek, Underwood, Yatala and Meadowbrook
- Garage and carport slabs at end of tenancy, with oil stains photographed before and after for the exit report
- Rental driveways and paths cleaned in the same visit, because the machine and the water are already on site
The method itself is the same wherever we take it — the full floor scrubbing & acid washing process is set out on the service page, and everything we cover in this region is on the Logan page.
Floor Scrubbing & Acid Washing across Logan
Every suburb below, plus the ones around them. If yours is not listed, send it to us on WhatsApp and we will confirm before you book.
Postcodes: 4114, 4117, 4118, 4119, 4127, 4128, 4129, 4130, 4131, 4132, 4133, 4205, 4207, 4280
- Springwood
- Daisy Hill
- Priestdale
- Rochedale South
- Underwood
- Slacks Creek
- Woodridge
- Kingston
- Logan Central
- Marsden
- Crestmead
- Berrinba
- Browns Plains
- Regents Park
- Hillcrest
- Heritage Park
- Boronia Heights
- Forestdale
- Park Ridge
- Munruben
- Shailer Park
- Cornubia
- Loganholme
- Tanah Merah
- Carbrook
- Loganlea
- Meadowbrook
- Waterford
- Waterford West
- Bethania
- Edens Landing
- Holmview
- Beenleigh
- Eagleby
- Mount Warren Park
- Windaroo
- Bannockburn
- Yatala
- Logan Village
- Yarrabilba
- Jimboomba
- Flagstone
- Greenbank
What happens on the day in Logan
We come and look
We check the floor and tell you what will and won’t come out.
Small test patch
We clean a hidden corner first, so you can see the result.
Area protected
Loose items moved, skirtings and drains covered before we start.
Machine scrub
A heavy rotary machine does the work — not a mop.
Dirty water out
We vacuum it up, then walk the floor with you.
Floor Scrubbing & Acid Washing in Logan — your questions
Anything not covered here, message us and we’ll answer in plain English.
Ask on WhatsAppThe exit report says oil stains in the garage. Can you get them out before the inspection?
Usually, and we photograph the before and after so you have something to hand the property manager. Fresh oil comes up almost entirely. Oil that has been soaking into an unsealed slab for years has gone into the concrete rather than onto it, and it will lighten a long way but may not disappear — we will tell you which you have when we look, so you are not paying for a result we cannot deliver.
How much notice do you need for an end-of-lease job?
A few days is comfortable, and we can often do better than that for a small garage or driveway. Give us the inspection date when you book and we will work back from it rather than the other way round. Logan is close to base, so it is one of the regions we can usually get to fastest.
Will acid washing damage my concrete?
Not at the right dilution, and that is the whole job. Acid strong enough to lift efflorescence or rust bleed is also strong enough to etch a slab permanently if it is left too long or mixed too hot, so we test an out-of-the-way section first and tell you what will and will not come up before anything goes down across the floor. If the concrete is stained through rather than dirty on top, we say so at the quote rather than charging you to find out.
What is the difference between floor scrubbing and acid washing?
Scrubbing is mechanical: a weighted rotary machine and a pad work dirt out of the surface and we extract the slurry. Acid washing is chemical, and it is for the things scrubbing cannot shift — mineral deposits, efflorescence, rust bleed and the grey film left on new concrete. Most jobs are a scrub. Acid comes out when the floor needs it, not by default.
